Re: Ove Decors 60-Inch Premium Rolling Tub Door

I got hold of Andre at OVE who was very helpful. Do not drill into the glass as that is not what the instructions on page 13 mean. Basically you should have a gap of .5 inch from the very back edge of the glass to the inner back of the B rail. Meaning do not push the glass fully into the B rail(looking at diagram O page 13 you will see the gap). Having left the gap, drill the holes and put the screws into the back of the glass to avoid it from moving backwards.
I am not sure why one needs to leave a gap and then put those screws in since shoving that glass all the way will stop it from moving back but that is what I was told by the manufacturer rep. Drill the holes from the inside (standing in the tub) and do not have your drill go through the B rail- the holes should be only on one side which is the inner side of the B rail.
Hope this helps those whom may have had the same question.